ATV & UTV Tire Size Calculator

Thinking about bigger ATV or UTV tires? Enter your current tire height and the height you want. See how it changes wheel torque, speed, and ground clearance, and which gear reduction gets your pulling power back. Works for any tire brand.

Know your measured tire heights? (more accurate)

Tires often measure shorter than their label, especially new or low-pressure tires. Enter the real ground-to-tread height in inches.

What happens when you go to a bigger tire

  • Wheel torque drops. Torque at the ground scales with current height / new height. Each extra inch of height costs roughly 3–4% of your pulling power on typical 26–32 inch tires.
  • Speed rises. At the same engine RPM, ground speed rises in proportion to tire height. Your speedometer reads low.
  • Ground clearance rises by about half the height gain.
  • Gear reduction restores torque. A bigger tire is also heavier and grips more, so it takes more than the height change to feel the same. Plan on roughly twice the height gain in extra reduction: going 25 to 32 inches (+28%) needs about a 60% gear reduction.

Why only height?

Tire width and rim size don't change these results. Torque, speed and ground clearance all depend on overall tire height. In a size like 28x10-14, height is the first number. You can type just the height, or paste the full size.

Do I need gear reduction with bigger tires?

Usually, once you go up 2 or more inches. Bigger tires cost wheel torque and load the belt and clutches harder, and a gear reduction kit brings torque back toward your current torque.

Nominal vs. measured height

Tire labels are nominal. Many tires measure an inch or two shorter than the label, and height changes with air pressure and load. If you can measure your tires, enter the real heights under the size fields for a more accurate result.

Weight matters too

Bigger tires are usually heavier, and rotating weight hurts acceleration and braking more than the same weight on the frame. Terache tires are engineered to be light.

These are physics estimates from tire height only. They do not account for your specific machine, clutching, or terrain.